FUTURA NeoFT Signal Simulator

As low as AED 3,043.00

Availability:In stock

Only %1 left

FUTURA neotf Signal Simulator is a precision testing device for single-use biomass sensors. Available in zero and high value versions, it simulates capacitance and conductivity signals to verify calibration accuracy, ensuring reliable viable cell density monitoring in sterile bioreactor and GMP bioprocess applications.

BrandAber

More Information
Product Name	FUTURA NeoFT Signal Simulator
Weight	1.000000

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Technical Data
Frequency Range	50 kHz to 20 MHz
Measuring Ranges	Capacitance: 0.0 to 400 pF/cm Conductivity: 1.0 to 40 mS/cm
Cell Concentration Range	Depends on cell size, typically: Yeast (6 µm): 10⁶ to 10¹⁰ cells/ml Bacteria (1 µm): 10⁹ to 10¹³ cells/ml Animal Cells (12 µm): 10⁵ to 10⁹ cells/ml Plant Cells (50 µm): 10³ to 10⁷ cells/ml
Resolution	0.1 pF/cm Bacteria: typically 0.2 g/L dry weight or 2 × 10⁹ cells/ml (E. coli) Yeast or Animal Cells: 0.05 g/L or 1 × 10⁵ cells/ml Relationship to biomass depends on cell type and cell line
Accuracy	Better than ± 3% of the reading
Stability	Better than ± 0.2 pF/cm at constant temperature with standard conductivity solution of ~12 mS/cm
Linearity	Better than ± 1% over 100 pF/cm
Precision	< ± 0.5 pF/cm (no filter active)
Power Supply	24 V DC, typically supplied by an Aber Connect Input: 110 V AC to 240 V AC mains
EMC Compliance	Directive 2014/30/EU EN 61326-1:2013 EN 61326-2-1:2013
FCC Compliance	CFR 47 Part 15 Subpart B – General
LVD Compliance	Low Voltage Directive 2014/35/EU EN 61010:2010
Weight	225 g
Operating Temperature Range	2 °C to 40 °C (36 °F to 140 °F)
Storage Temperature Range	2 °C to 25 °C (36 °F to 140 °F)
Process Connection	Via Thermo Scientific port SV20716
Sterilization	Gamma ray sterilizable, 25–45 kGy
Shelf Life	3 years after irradiation under appropriate storage conditions
Mechanical Pressure Resistance	1 bar
Wetted Materials	Makrolon Rx2530, Platinum 99.99%, Dymax 1180-M-UR
Material Compliance	FDA-modified ISO 10993-1 USP Class VI (2019) BPOG L&E
Additional Precision	Better than ± 1% over 100 pF/cm
Approvals	USP Class VI & FDA for all wetted materials, factory calibration
Minimum Probe Clearance	60 mm *For further information on probe clearance, contact support@aberinstruments.com