Shaking Incubator Agitating Water Baths, Reciprocating

AED 11,645.00

Availability:In stock

Only %1 left

Yamato BT101/BT311 Reciprocating Shaking Water Bath – combines horizontal shaking with pump jet agitation for precise sample mixing at controlled temperature (5–80°C). High-precision Pt100/K-thermocouple sensors, VS6 PID controller, and self-diagnostic safety. Capacities 19L/34L, holds 130–260 test tubes. Ideal for biochemical assays, enzyme reactions, and culture testing.

BrandYamato Scientific

More Information
Product Name	Shaking Incubator Agitating Water Baths, Reciprocating
Weight	1.000000

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Technical Data
Specification	BT101 / BT311
Product Code	221204 / 221205
System	Reciprocating horizontal shaking with pump jet agitation
Temperature Control Range	Room Temperature +5°C to 80°C (with optional water tank lid)
Temperature Control Accuracy / Fluctuation	±0.02 to ±0.08°C / JIS 0.3°C
Temperature Distribution Accuracy / Gradient	±0.1°C / JIS 1.5°C
Time to Maximum Temperature	BT101: Approximately 95 minutes (RT 23°C) BT311: Approximately 120 minutes (RT 23°C)
Shaking Speed	20–160 strokes/min
Shaking Stroke Width	10–40mm, variable
Heater Power	BT101: 1.2kW BT311: 2.5kW
Agitation Pump	BT101: 6W BT311: 10W
Shaking Motor	BT101: 25W BT311: 40W
Safety Functions	Self-diagnostic (auto over-temperature prevention, temperature sensor abnormality, heater wire break, SSR short-circuit, main relay failure, memory error, internal communication abnormality, measured temperature abnormality, dry-run abnormality), over-temperature protector, overcurrent leakage breaker
Controller Type	VS6 type, PID control
Operation Functions	Constant value, auto-stop, auto-start, quick auto-stop
Additional Functions	Calibration offset, setting lock, outage recovery mode selection
Sensor	Pt100Ω platinum resistance thermometer (temperature control) and K-type thermocouple (over-temperature protector)
Container Rack Capacity (Test Tubes)	BT101: 130 tubes (∅16.5mm, length 150–200mm, JIS) BT311: 260 tubes
Container Rack Capacity (Flasks)	BT101: 12 × 100mL, 5 × 300mL, 3 × 500mL BT311: 24 × 100mL, 10 × 300mL, 6 × 500mL
External Dimensions (W × H × D)	BT101: 579 × 414 × 325mm BT311: 809 × 414 × 325mm
Tank Capacity (Full)	BT101: Approximately 19L BT311: Approximately 34L
Power Supply (50/60Hz)	BT101: AC100V, 14A BT311: AC200V Single-phase, 14.5A
Breaker Capacity	15A
Weight	BT101: Approximately 27kg BT311: Approximately 48kg
Shaking Rack Quantity	BT101: 1 BT311: 2
Rack Dimensions (Effective)	290 × 220 × 170mm (effective area: 268 × 200 × 150mm)
Accessories	Instruction manual, warranty card, drain cap, pre-installed drain hose, wrench (included with both models)

More from Yamato Scientific

Economy Gravity Convection Oven

AED 5,237.00
SKU: Economy Gravity Convection Oven
Variants from AED 5,237.00
Constant temperature drying oven Gravity Convection

AED 8,232.00
SKU: Constant temperature drying oven Gravity Convection
Variants from AED 8,232.00
Variable-speed constant-temperature drying oven

AED 17,328.00
SKU: Variable-speed constant-temperature drying oven
Variants from AED 17,328.00
Slim Economy Gravity Convection Oven

AED 7,167.00
SKU: Slim Economy Gravity Convection Oven
Variants from AED 7,167.00
Slim Precision Mechanical Convection Oven

AED 28,112.00
SKU: Slim Precision Mechanical Convection Oven
Variants from AED 28,112.00
Precision constant temp oven with explosion vent

AED 26,975.00
SKU: Precision constant temp oven with explosion vent
Variants from AED 26,975.00
Programmable Energy Saving Mechanical Convection Oven

AED 15,777.00
SKU: Programmable Energy Saving Mechanical Convection Oven
Variants from AED 15,777.00