Inert Oven

AED 28,007.00

Availability:In stock

Only %1 left

SKU

Inert Oven

Inert Oven (N2 Atmosphere) – heats up to 360°C for oxidation-sensitive heat treatment and testing. Introduces nitrogen gas for low-oxygen environment, with programmable operation, self-diagnostic safety, and door-interlock shutoff. Available in 95L/223L capacities. Ideal for materials testing requiring precise, oxidation-free high-temperature processing.

BrandYamato Scientific

More Information
Product Name	Inert Oven
Weight	1.000000

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Technical Data
Specification	DN411I	DN611I
Product code	212903	212904
System	Forced air circulation (with N2 gas introduction)
Temp. control range	RT+15~360°C
Temp. control accuracy	±0.2°C (at 360°C) JTM K05
Temp. fluctuation	1.2°C (at 360°C) JIS
Temp. distribution accuracy	±3°C (at 360°C) JTM K05
Temp. gradient	12°C (at 360°C) JIS	20°C (at 360°C) JIS
Time to max temp.	~60 min	~60 min
Nitrogen replacement time	~30 min (RT, O2 conc. 2% at center)	~70 min (RT, O2 conc. 2% at center)
Heater capacity	3.0kW	4.0kW
Interior	Stainless steel sheet
Exterior	Electro-galvanized steel sheet, baked paint finish
Insulation	Glass wool + ceramic fiber
Heater material	SUS pipe heater
Sensor	K-type thermocouple (control + independent overheat protection)
Blower fan/motor	Sirocco fan / Capacitor motor
Flow meter/gas inlet	Max flow rate 30 L/min, φ9mm outer diameter hose nipple
Temp. control method	PID control
Temp. setting	Digital via ▲▼ keys
Temp. display	Tank temp: Green LED / Set temp: Orange LED (1°C resolution)
Other display	Temp. pattern LED (rising/stable/falling)
Timer / resolution	1min–99hr59min / 1 min
Operation functions	Constant value, programmed, auto-start, auto-stop, quick auto-stop
Program mode	99 steps, 99 patterns, repeat function
Additional functions	Runtime accumulation (65,535 hrs), calendar timer (24hr), calibration offset, power/CO2/heater output monitor, outage recovery mode, setting save/recall
Heater circuit control	Triac, zero-cross method
Safety devices	Self-diagnostic (sensor abnormality, heater wire break, triac short-circuit, main relay failure, auto over-temp prevention), key lock, leakage circuit breaker, independent over-temp protector, door switch (cuts fan+heater on door open)
Internal capacity	95L	223L
Shelf load capacity	30kg/sheet
Shelf levels	12	17
Shelf pitch	30mm
Shelf board accessory	2 sheets
Shelf brackets	4 sets
Internal dims (W×D×H)	470×450×450mm	620×600×600mm
External dims (W×D×H)	640×695×915mm	790×845×1065mm
Power source	1φ AC200V, 16A	1φ AC200V, 21A
Breaker capacity	30A
Weight	90kg	130kg