Far-infrared heating furnace

AED 48,019.00

Availability:In stock

SKU

LBX-YMT-0170

DIR631C Far Infrared Heating Furnace – combines 6.4kW IR radiation (16 ceramic heaters, upper+lower) with forced-air circulation for rapid, uniform polymer material heat treatment up to 360°C. PID control, dual K-thermocouple sensors, door switch detection, and manual exhaust damper. 3-phase AC380V export specification. Ideal for large-batch IR processing.

BrandYamato Scientific

More Information
Product Name	Far-infrared heating furnace
Weight	1.000000
Part No.	LBX-YMT-0170
Supplier Item Code	DIR631C

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Technical Data
Specification	DIR631C
System	IR radiation + forced-air circulation + ventilation
Temp. control range	RT+10~360°C
GB standard — temp. fluctuation	±0.2°C (at 360°C, IR heater OFF)
GB standard — temp. deviation	±5°C (at 360°C, IR heater OFF)
JTM standard — temp. control accuracy	±0.2°C (at 360°C, IR heater OFF)
JTM standard — temp. distribution accuracy	±3°C (at 360°C, IR heater OFF)
Time to max temp.	100 min (RT to 360°C, IR heater OFF)
Main body heater	Finned stainless steel heating tube, 3.75kW
IR heater	0.2kW×16 units×upper+lower (both sides), total 6.4kW
Motor/fan	Capacitor motor 20W + axial flow fan
Sensor — main body	K-type thermocouple dual-branch ×1 (body temp. controller + over-temp protector)
Sensor — IR heater	K-type thermocouple ×2 (for IR heater control + embedded in IR heater center)
Cable hole	φ30mm (rear)
Other mechanisms	Exhaust damper (manual type)
Temp. control method	PID control (main body)
Operation modes	Constant value, quick auto-stop, auto-stop, auto-start
Additional functions	Calibration offset, key lock, power outage compensation, door switch detection
Safety — leakage circuit breaker	Leakage, short-circuit, overcurrent protection
Safety — over-temp protector	Automatically cuts heater circuit when temp. overheats
Safety — self-diagnostic	Temp. sensor abnormality, heater wire break, SSR short-circuit, auto over-temp prevention
Internal chamber dims (W×D×H)	600×600×600mm
Effective dims (W×D×H)	600×600×200mm
External dims (W×D×H)	1200×780×1000mm
IR heater upper/lower spacing	200mm
Weight	~230kg
Power source	3-phase AC380V, 50/60Hz, 18A
Shelf boards (SS wire mesh)	1 piece
Shelf brackets	2 pieces
Optional stand	OP62C
Other options	Shelf board (1 board incl. 2 brackets), mini printer, recorder, combined alarm lamp (standby/running/fault), external communication (RS485), temp. output terminal (4-20mA), external alarm output terminal, time-up output terminal, centralized monitoring software