Spray dryer

AED 138,578.00

Availability:In stock

SKU

LBX-YMT-0022

Advanced Spray Dryer — 7-inch multilingual touchscreen spray dryer with electric lift, temperature zone control, and remote operation. Converts solutions/suspensions directly into uniform, low-moisture fine powder. Supports dual/triple-fluid nozzles, optional GF200 granulation upgrade, and GAS411C solvent recovery. Ideal for food, pharma, and materials R&D.

BrandYamato Scientific

More Information
Product Name	Spray dryer
Weight	1.000000
Part No.	LBX-YMT-0022
Supplier Item Code	GB211C-A

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Technical Data
Specification	Detail
Model	GB211C-A
Compatible Samples	Water-soluble & organic solvent (with GAS411C connection)
Water Evaporation Capacity	Max. 1500 mL/h
Temperature Controller Setting Range	0–240°C (inlet), 0–100°C (outlet)
Temperature Control Accuracy	Inlet temp ±1°C
Drying Air Volume Range	0.2–0.9 m³/min
Spray Air Flow Range	0–30 L/min
Spray Pressure Range	0.3–0.6 MPa
Nozzle Cleaning Function	Front-nozzle discharge, manual pulse-jet cleaning
External Output	Inlet/outlet temperature output (4–20mA)
Temperature Controller	Multi-PID control, temperature zone control for faster/more stable heating
Touchscreen	7-inch, Chinese/Japanese/English, controls temperature, blower, heater, feed pump, pulse-jet, auto needle-clearing, alarms, run curve
Control Switch	Selectable inlet or outlet temperature control
Temperature Sensor	PT100 resistance thermometer
Heater	3.2 kW
Feed Pump	Peristaltic-tube type
Spray Air Pump	External compressor (sold separately) or built-in compressor when connected to GAS411C
Service Outlet	Stirrer: 200–230V~, 1A
Intake Blower	Duct-type blower
Filters	Intake filter, exhaust filter
Solvent Recovery	Compatible with GAS411C organic solvent recovery unit
Spray Nozzle Cooling	Compatible with CF312L-B cooling circulator (sold separately): 2× fittings, Ø10.5mm
Spray Air Connection	Ø7mm outer diameter fitting
Exhaust Connection Diameter	Ø50mm
Nozzle Types Supported	Two-fluid and three-fluid nozzles
Data Logging	Experimental data recording/storage (optional)
Remote Control	Supported
Granulation Upgrade	Compatible with GF200 granulation component (sold separately) — converts to fluidized bed dry granulator
Lift Mechanism	Electric lift (vs. manual platform on ADL312SC-A)
Safety Functions	Inlet/outlet over-temperature protection, feed pump reverse-rotation, overcurrent/leakage protection, nozzle connection anomaly detection (when connected to GAS411C)
External Dimensions (W×D×H)	760 × 420 × 1350 mm
Weight	~110 kg
Power Supply	200–230V~, 50/60Hz, 17–21A
Standard Accessories	Feed hoses ×2, exhaust hose (with 1 clamp) ×1, exhaust adapter, outlet temp sensor, fuses, anti-static ground wire, intake hose 5m (2 clamps), nozzle conversion sleeve, stand assembly, protective cover (COV30), GF301C glass assembly, quick plug, air tube A, air tube B, warranty card, manual